Robert E. De Barth - D-R Commercial Riveter

This site's pages best viewed at 800X600 or higher.
Microsoft Internet Explorer

D-R Commercial Riveter (pat. pend.)


Our single feed D-E Commercial Riveter is an excellent choice to fasten work needing more than a brass eyelet for security.

Brass eyelets are being used to secure items that may require a stronger fastener. The D-R Commercial Riveter uses our standard 5/32" rivet that are brass plated steel for a more secure attachment. Riveting requires a 5/32 receiving hole. The brass coating also helps prevent rusting over time.

The R series rivets can also be used with our D-E Commercial Eyeleter with the proper set of dies installed. Our specialty is adapting your application for efficient production at the lowest cost possible. We welcome all requests for any type of application. This Riveter features adjustable limits and an automatic handle return with a three-1/4 inch throat depth. Our R series Rivets can be set with either a cap or without as pictured below.

Listed below are the most common stock rivets available:

Series R-1 rivets are for material thickness from 10 to 25 sheets of paper.
Series R-0 rivets are for material thickness from 20 to 35 sheets of paper.
Series R-11 rivets are for material thickness from 50 to 70 sheets of paper.

We mention paper thickness as a guide and are referring to standard weight (20 lb.) printer paper stock.

For more information about design and application options, please call and ask for Earl at 215-855-6851 -- Tuesday to Saturday 9:00 to 1:00 Eastern.

Price is $ 595.00 plus $ 20.00 S&H. International orders, E-Mail with complete shipping address for S&H cost.


D-R Commercial Riveter Specifications as shown including base:


Height:    15"

Width:    8 1/2"

Depth:    11"

Weight"    approx. 21 lbs.

To Order:

Please see our Business Terms & Conditions before ordering:


Tuesday through Saturday
9:00AM to 1:00PM EST

Robert E. De Barth
1337 North Broad Street
Lansdale, PA 19446

| Business Terms and Conditions | Company Information | Contact Information | Home | Lifetime Warranty
| Map to Our Facility |
 | Products & Services | Return Policy & ProceduresTestimonials |

General Web Site Links

| B-50 Brass Wire Refills | Bates Brass Wire Staplers |  
Brothers Ribbon Conversion | DC730 Selector Shaft | Desk Drive |
FICS | Hot Rod | Impossible To Find Part and Accessories |
| Phone Checks | Paymaster  Check Writers

Eyeleters & Stuff

| Bates Automatic Eyeleter | Bates and D Series Eyelets and Rivets | Combination Devices | D-E Commercial Eyeleter |
D-R Commercial Riveter | Eyeleter Page | Eyelets | Eyelet Controversy
| Extracting Devices | Fastening Devices | Mini Eyeleter | Mini Eyelets | Punching Devices

Typewriters & Stuff

| Brothers Paper Feed Gear Conversion |DBC Replacement Parts Platen Knob Replacements  |
New Portable Electronic Typewriter | IBM Platens | IBM Selectric Motors | New Portable Heavy Duty Typewriters |
Olivetti Replacement Ribbon Knobs | Olympia Ribbon Feed Gear Fix | Platens | Typewriter Dust Covers | Typewriter Feet | Typewriter Repair Services |
| Typewriters Repaired  |
Typewriter Ribbons |

Rare Offerings

| 1883 Colt Frontier Model .44 Caliber | 76 Cadillac Eldorado | Draw Bar, Tube | Boley 11-inch Lathe | Lathes, Tooling, & Accessories | REDs Tapping Spider | Restored 16-inch Boley Lathe  |

     Established 1945
      Contact Information

Store Hours
 9:00 to 4:00 Eastern US
Tuesday through Saturday




Shipping and Mailing Address
1337 North Broad Street - Lansdale, Pennsylvania 19446 - USA

Local area map to our Facility in Lansdale, Pennsylvania

Electronic Mail 
General Information: E-Mail
Sales: E-Mail
Customer Support: E-Mail
Webmaster: E-Mail

Send mail to E-Mail with questions or comments about this web site.
Copyright © 2001
Page last modified: December 29, 2015