Robert E. De Barth - Bates and D Series Eyelets and R Series Rivets

This site's pages best viewed at 800X600 or higher.
with
Microsoft Internet Explorer


                                                         
Standard D Series Bates Brass Eyelets

                                                                  
Standard D Series Chrome Eyelets 

        C Style on Left ----------- CC Style on right       

 

            

Standard R Style Rivets shown with and without Cap

Eyelets are the funniest things...

They do not appear to be much of an item but when your Bates Eyeleter starts to jam the eyelets in the delivery system, you discover that these little devils may be "a more than meets the eye" kind of thing. 

We spend a lot of time and effort to find a source of eyelets that are within our demanding specifications, highest quality, and consistent availability and pricing. If you would like a more detailed look at why eyelets from some sources jam the Bates Automatic Eyeleter, go to the The Eyelet Controversy. This relatively non-technical document is about a three minute read on what we discovered about eyelets.

Eyelets

Currently we offer 6 sizes of brass and chrome (silver colored) D Series eyelets for the Bates Automatic Eyeleter and our D-E Commercial Eyeleter: 

             Our 3 series Bates eyelets are used for material equal to the thickness of 1 to 7 sheets of paper.

             Our 2 series Bates eyelets are used for material equal to the thickness of 5 to 15 sheets of paper.

             Our 1 series Bates eyelets are used for material equal to the thickness of 10 to 25 sheets of paper.

             Our 0* series eyelets are used for material equal to the thickness of 20 to 35 sheets of paper.

             Our 9** series eyelets are used for material equal to the thickness of 40 to 60 sheets of paper.

             Our 11** series eyelets are used for material equal to the thickness of 50 to 70 sheets of paper.

  * -- Will not feed automatically in the Bates Eyeleter but may be able to be used
** -- Will not work in the Bates Eyeleter. Used mainly in our D-E Commercial Eyeleter

Rivets

Currently we offer 3 sizes of brass coated R Series steel rivets for the our D-R Commercial Riveter: 

             Our 1 series rivets are used for material equal to the thickness of 10 to 25 sheets of paper.

             Our 0 series rivets are used for material equal to the thickness of 20 to 35 sheets of paper.

             Our 11 series rivets are used for material equal to the thickness of 50 to 70 sheets of paper.

We mention paper thickness as a guide and are referring to standard weight (20 lb.) printer paper stock.


Eyelet and Rivet Application and Pricing Chart

                                   |                               Eyeleter Application                                                      |             Riveter Application                |

Style C Eyelets are chrome, Style CC Eyelets are chrome but flower when set

To fasten work
 as thick as:
Order Number Bates Automatic Eyeleter D-E Commercial Eyeleter Price Order Number D-R Commercial Riveter
1 to 7 sheets of paper use Series 3 Eyelets and Rivets D-3  XX XX $ 39.00/1,000 N/A N/A
Style C D-3C  XX XX $ 9.50/100 N/A N/A
Style CC D-3CC  XX XX $ 9.50/100 N/A N/A
5 to 15 sheets of paper use Series 2 Eyelets and Rivets

D-2

XX XX $ 39.00/1,000 N/A N/A
Style C D-2C  XX XX $ 9.50/100 N/A N/A
10 to 25 sheets of paper use Series 1 Eyelets and Rivets D-1

 

XX XX $ 39.00/1,000 R-1 $ 7.95/100
Style C D-1C  XX XX $ 9.50/100 N/A N/A
20 to 35 sheets of paper use Series 0 Eyelets and Rivets D-0 *** XX $ 39.00/1,000 R-0 $ 7.95/100
Style C D-0C  *** XX $ 9.50/100 N/A N/A
40 to 60 sheets of paper use Series 9 Eyelets and Rivets D-9 N/A XX $ 7.30/100 N/A N/A
Style C D-9C  N/A XX N/A N/A N/A
50 to 70 sheets of paper use Series 11 Eyelets and Rivets D-11 N/A XX $ 7.30/100 R-11 $ 7.95/100
Style C D-11C  N/A XX N/A N/A N/A

Series R Rivet Caps

----- ----- ----- ----- R-C $ 15.95/100

              We mention paper thickness as a guide and are referring to standard weight (20 lb.) printer paper stock (0.004")

              *** Must be hand fed one by one.             XX - Tested for device listed.            N/A - Not available for device listed.

S&H is determined at time of order. International orders, E-Mail with complete shipping address for S&H cost.

To Order:

Please see our Business Terms & Conditions before ordering:

E-Mail:

imanager@debarth.org

Phone:
Tuesday through Saturday
9:00AM to 1:00PM EST
215-855-6851

Post:
Robert E. De Barth
1337 North Broad Street
Lansdale, PA 19446
USA


| Business Terms and Conditions | Company Information | Contact Information | Home | Lifetime Warranty
| Map to Our Facility |
 | Products & Services | Return Policy & ProceduresTestimonials |


General Web Site Links

| B-50 Brass Wire Refills | Bates Brass Wire Staplers |  
 |
Brothers Ribbon Conversion | DC730 Selector Shaft | Desk Drive |
|
FICS | Hot Rod | Impossible To Find Part and Accessories |
| Phone Checks | Paymaster  Check Writers

Eyeleters & Stuff

| Bates Automatic Eyeleter | Bates and D Series Eyelets and Rivets | Combination Devices | D-E Commercial Eyeleter |
D-R Commercial Riveter | Eyeleter Page | Eyelets | Eyelet Controversy
| Extracting Devices | Fastening Devices | Mini Eyeleter | Mini Eyelets | Punching Devices

Typewriters & Stuff

| Brothers Paper Feed Gear Conversion |DBC Replacement Parts Platen Knob Replacements  |
 |
New Portable Electronic Typewriter | IBM Platens | IBM Selectric Motors | New Portable Heavy Duty Typewriters |
|
Olivetti Replacement Ribbon Knobs | Olympia Ribbon Feed Gear Fix | Platens | Typewriter Dust Covers | Typewriter Feet | Typewriter Repair Services |
| Typewriters Repaired  |
Typewriter Ribbons |

Rare Offerings

| 1883 Colt Frontier Model .44 Caliber | 76 Cadillac Eldorado | Draw Bar, Tube | Boley 11-inch Lathe | Lathes, Tooling, & Accessories | REDs Tapping Spider | Restored 16-inch Boley Lathe  |


     
     Established 1945
      Contact Information

Store Hours
 9:00 to 4:00 Eastern US
Tuesday through Saturday


Telephone
215-855-6851


FAX

215-855-6852

Shipping and Mailing Address
1337 North Broad Street - Lansdale, Pennsylvania 19446 - USA

Local area map to our Facility in Lansdale, Pennsylvania

Electronic Mail 
General Information: E-Mail
Sales: E-Mail
Customer Support: E-Mail
Webmaster: E-Mail

Send mail to E-Mail with questions or comments about this web site.
Copyright © 2001
Page last modified: May 22, 2013